DC1200 Double Coated Polyester Permanent Adhesive

Description:

½ Mil clear polyester coated with 1 Mil permanent solvent based acrylic adhesive on one side and a removable adhesive on the other with a 74# liner.

Usage:

POP displays, nameplates, mouse pads, industrial mounting adhesive (where a temporary bond is desired).

Physical Properties:

Carrier: ½ Mil clear polyester
Adhesive: 1.0 Mil solvent acrylic both sides
Liner: 74# liner (3.5 Mils)
Total Thickness: 2.5 Mils (+ or – 10%)

​

Adhesion:

Stainless Steel 4.5 psi
PVC 4.0 psi
Polystyrene 4.0 psi
Low Surface Energy Plastic Not Recommended

​

Chemical Resistance: Good
Service Temp: -30 To 225 Degrees F
Application Temp: 50 Degrees F
Shelf Life: 1 Year @ 70 Degrees F @ 50 Rh
Standard Rolls: 27” X 750’

​

Custom Widths And Lengths Available.
This information is based on test data and is to be used only as a guide not absolute values. As with all adhesives the customer should test to be sure the products meet the required application.

​

This information is based on test data and is to be used only as a guide not absolute values. As with all adhesives the customer should test to be sure the products meet the required application.