top of page

A2660 Transfer Adhesive


2 Mil solvent based unsupported acrylic adhesive with high shear and bond characteristics coated on a 60 or 74#moisture stable release liner.


To provide a pressure sensitive adhesive for a wide variety of substrates such as, polycarbonates, various plastics, glass, metals, board stocks, etc. It is an excellent adhesive for the graphic arts industry in the manufacture of decals, nameplates, and POP signage.

Physical Properties:

Adhesive: 2.0 Mil Acrylic
Liner: 74#

Adhesion to:

Polycarbonate 4.7 psi
PVC 5.2 psi
Stainless Steel 4.0 psi
Polystyrene 3.5 psi
Low Surface Energy Plastics – not recommended

Chemical Resistance: Good

Service Temp: -40 Degrees to 225 Degrees F

Minimum Application Temperature: 50 Degrees F

Shelf Life: 2 years at 70 Degrees F @ 50 RH

Standard Rolls: 27” x 540’

This information is based on test data and is to be used only as a guide not absolute values. As with all adhesives the customer should test to be sure the products meet the required application.

bottom of page