top of page

A4790 MS Transfer Adhesive


4 mil solvent based unsupported acrylic adhesive with high shear and bond characteristics, coated on a 90lb moisture stable release liner.


To provide a pressure sensitive adhesive for a wide variety of substrates such as; polycarbonates, various plastics, glass, metals, board stocks, aluminum, etc. It is an excellent adhesive for the graphic arts industry in the manufacture of decals, nameplates, and POP signage.

Physical Properties:

Adhesive thickness: 4 mils

Adhesion to:

Stainless Steel (15 min) 4.3 lb
Stainless Steel (24 hrs) 5.5 lb
HDPE (15 min) 3.5 lb
HDPE (24hrs) 3.3 lb

Shear: + 170 hours

Chemical Resistance: Good

Service Temperature: -70° to 350° F
Minimum Application Temperature 40 ˚ F

Shelf life: 1 year at 70˚ F @ 50% RH

This information is based on test data and is to be used only as a guide, not absolute values. As with all adhesives, the customer should test to be sure the products meet the required application. Adhesion test is based on PSTC-1, 180˚ Peel adhesion procedures. Shear test is based on PSTC-7 procedures.

bottom of page