A2770 MS Transfer Adhesive
Description:
2 mil solvent based unsupported acrylic adhesive with high shear and bond characteristics with two liners for selective die cutting. Double linered with 74lb moisture stable liner and 3 mil clear high density polyethylene liner.
Usage:
To provide a pressure sensitive adhesive for a wide variety of substrates such as; polycarbonates, various plastics,
glass, metals, board stocks, aluminum, etc. It is an excellent adhesive for the graphic arts industry in the manufacture
of decals, nameplates, and POP signage.
Physical Properties:
Adhesive thickness: 2 mils
​
Adhesion to:
Stainless Steel (15 min) 2.9 lb
Stainless Steel (24 hrs) 4.2 lb
HDPE (15 min) 3.0 lb
HDPE (24hrs) 2.9 lb
Shear: + 170 hours
Chemical Resistance: Good
Service Temperature: -70° to 350° F
Minimum Application Temperature 40 Ëš F
Shelf life: 1 year at 70Ëš F @ 50% RH
​
This information is based on test data and is to be used only as a guide, not absolute values. As with all adhesives,the customer should test to be sure the products meet the required application. Adhesion test is based on PSTC-1, 180Ëš Peel adhesion procedures. Shear test is based on PSTC-7 procedures.